PAI

Polyamideimide

PAI is used relatively rarely as it is difficult to process, but PAI has many applications due to its high thermal strength: 50 MPa at 260 ° C.

PAI with lubricant is used for bearings, bushings, valves, etc.

Do you need datasheet, please contact us at tel: +45 4353 8844 or mail: linatex@linatex.dk

Trade names of raw materials and semi-finished products:

  • Torlon®
  • Tecator™
  • Semitron®
  • Duratron®

Linatex supplies both semi-finished and finished products, as required. Documentation for quality and short delivery times makes Linatex a good partner.

What is PAI used for

Application temperature normally up to approx. C 260 ° C.
Density usually approx. 1.38-1.46 g/cmᶟ

Advantages:

  • Withstand high temperatures (260 ° C)
  • Only 4% of the tension is lost after 2000 hours at 200 ° C
  • UL index 220 ° C
  • Extremely low friction and wear in the qualities filled with teflon or graphite
  • Extremely low heat expansion
  • Chemical Resistant

Limitations:

Extremely difficult to spray.

Attacked by hot alkalis and acids.

Low moisture absorption.

Not food approved.

Attacked by overheated steam at 160 ° C.

Applications:

Wear parts in bearings, seals, valves, rent houses etc.

Especially seals exposed to high temperatures and valve parts that are exposed to high pressure and chemical influences.

Linatex is a member of EPDA and IAPD and is subject to ongoing control by the Danish Food Administration

Please note that it is the end user who is responsible for the materials used to comply with applicable laws and regulations.

Linatex uses a Zeiss 3D measuring machine to ensure that deliveries meet the desired dimensions.

We will be happy to help you with advice, drawings and specifications, so the final product will be right.

Linatex stands for proven quality in all products.